Boiler, cylinder and hot water guides
Boilers and cylinders need to work with the property around them. These guides explain replacement choices, survey preparation, supply and control considerations, and the records to keep after the work.
117 guides
Articles and fault guides
Aqualisa shower not working: faults, checks and repairs
Aqualisa digital, mixer, electric or power shower playing up? The checks to make, why a new boiler can stop it working, and when to call Aqualisa or us.
Read thisBack boiler replacement: your options and what the job involves
Replacing a back boiler behind a gas fire? Compare a combi, system or regular boiler, see what removal involves, how long it takes and what to check first.
Read thisBaxi E133 fault: preparing for fault diagnosis
Understand Baxi E133 in its correct model group, separate a fault description from a diagnosis and prepare useful details for a safe boiler repair visit.
Read thisBoiler condensate pipe routing for planned work
Plan boiler condensate drainage before moving or replacing an appliance. Compare internal and exposed routes, access, freezing risks and waste connections.
Read thisWhen a boiler condensate pump needs attention
Recognise condensate pump problems, report useful symptoms and arrange safe inspection of the pump, discharge route and boiler shutdown connection.
Read thisBoiler installation certificate: what you get and how to replace a lost one
The Building Regulations certificate for a new boiler: who sends it, how long it takes, why buyers ask for it, and what to do if it is lost or never came.
Read thisKettling and unusual boiler noise: repair or system investigation?
Describe boiler kettling, rumbling or banging clearly and understand how an engineer separates appliance faults from circulation and wider system issues.
Read thisWhy does a boiler lock out again after a reset?
A boiler that locks out again needs its fault history investigated. Learn what to record, when to stop using it and how to prepare for a repair visit.
Read thisBoiler making a noise: what each loud sound usually means
Banging, gurgling, humming, whistling or whooshing? What each boiler noise usually points to, what you can safely check and when to switch the boiler off.
Read thisNew boiler noise after a service: what to report
Report new boiler noise after servicing with a useful timeline, operating details and safety signs, so the follow-up addresses the actual change.
Read thisBoiler not firing up: it tries to light, then gives up
Boiler has power but won't fire up? Check gas, meter credit, pressure and a frozen condensate pipe, reset once, then know when it is an ignition fault.
Read thisBoiler not working: what to check before you call
Boiler not working, no heating or no hot water? Five safe checks for power, controls, pressure, gas and a frozen condensate pipe, and when to call.
Read thisHow parts availability changes a boiler repair decision
Assess boiler repair options using the exact failed part, confirmed supply, repair checks and likely disruption rather than the boiler’s age alone.
Read thisBoiler pilot light gone out: how to relight it safely
Pilot light out on an older boiler? When it is safe to relight, the steps most manufacturers give, why it keeps going out, and when to stop and call.
Read thisBoiler pressure relief valve: what it does and why it drips
What the pressure relief valve on a boiler does, where its pipe comes out, why it drips or leaks, what you can safely check and when it needs replacing.
Read thisWhy is boiler pressure rising when the heating is off?
Boiler pressure rising while heating is off needs the cold-pressure pattern checked. Understand filling and expansion clues without opening or draining it.
Read thisBoiler pressure too high? How to lower it safely
Boiler pressure over 2.5 bar? How to read the gauge, lower the pressure by bleeding a radiator, and the faults that push it back up and need an engineer.
Read thisWhy a replacement boiler needs the existing system assessed
Plan system assessment, cleaning and water treatment with a boiler replacement. Understand the evidence, access, method and handover records needed.
Read thisAccess a boiler engineer needs for a service
Prepare for a boiler service with clear working space, meter and control access, and information about cupboards, concealed flues and shared areas.
Read thisShould a boiler be serviced before a home sale?
Planning a home sale? Separate boiler servicing, missing maintenance records and a buyer’s inspection, then arrange the right visit before moving.
Read thisWhat happens if a boiler service finds a defect?
Understand a defect found during boiler servicing: the safety instructions, repair approval, parts, follow-up checks and records to keep afterwards.
Read thisBoiler service records and installation handover
Keep records after installation, servicing and repairs. Understand commissioning details, service history, warranty information and landlord records.
Read thisBoiler servicing and a landlord gas check: what differs?
Understand the difference between a boiler service and landlord gas safety check, the records each produces and how to book both visits together.
Read thisBoiler switching on and off frequently: what needs investigating?
Frequent boiler starts can involve heating demand, controls or circulation. Learn what to record and how to plan diagnosis before replacing equipment.
Read thisBoiler Upgrade Scheme: what it pays for and who qualifies
The Boiler Upgrade Scheme funds heat pumps, not new gas boilers. Who qualifies, how the grant is claimed and what to do if you just need a boiler replaced.
Read thisBoiler warranty and guarantee: what to check before buying
Compare boiler cover by its actual terms: registration, servicing, parts, labour, exclusions and claims, rather than the warranty or guarantee label.
Read thisCan weather compensation be added to an existing boiler?
Plan weather compensation for an existing boiler by checking its model, control protocol, sensor options, zones and commissioning requirements first.
Read thisBoiling-water tap problems: plumbing repair or manufacturer service?
A boiling-water tap fault may involve its tank, filter, controls or connections. Identify the system and choose the right repair route before opening it.
Read thisCan a boiler explode? The real risks and warning signs
Can a boiler explode? Modern gas boilers are built to shut down first. The real risks, the warning signs and what to do if you smell gas or hear banging.
Read thisCarbon monoxide alarm beeping: warning, battery or fault?
Carbon monoxide alarm beeping? How to tell a real CO alarm from a low battery chirp or end-of-life warning, and what to do about each one straight away.
Read thisCarbon monoxide at home: signs, alarms and what to do
Carbon monoxide exposure: the symptoms, the warning signs on boilers and fires, where alarms go and what to do straight away if you suspect a leak at home.
Read thisWhat size hot water cylinder do you need?
Choose hot water cylinder size around showers, baths, simultaneous demand and recovery. Learn what to tell the installer before selecting a capacity.
Read thisCombi or system boiler: choosing for your home
Compare combi and system boilers by hot water demand, storage space, supply and installation changes. Build a useful brief before choosing equipment.
Read thisBoiler quotes: how to compare them properly
What a new boiler quote should include, why online prices and surveyed quotes differ, and the questions to ask before you accept one. A plain checklist.
Read thisBlocked condensate pipe: signs, causes and fixes
Boiler gurgling or locking out and it isn't freezing? A blocked condensate pipe is a common cause. What you can check outside and what needs an engineer.
Read thisHow an engineer assesses a cylinder expansion-vessel fault
Learn how cylinder expansion-vessel concerns are assessed, what supports repair or replacement and why a drip alone does not identify the failed part.
Read thisHot-water cylinder heat loss: insulation and installation choices
Assess cylinder heat loss using insulation condition, published standing-loss figures and exposed pipework before choosing an improvement or replacement.
Read thisChoosing a cylinder location with enough service access
Plan a cylinder location around dimensions, removal routes, connection space and future maintenance, with structural and discharge questions checked early.
Read thisCylinder pressure-reducing valve faults and poor outlet flow
Explore how an engineer distinguishes inlet valve problems from mains limitations and outlet faults, with checks before cylinder components are replaced.
Read thisHot-water cylinder recovery time: what affects the wait?
Compare cylinder recovery times using the heat source, test conditions and household demand, and distinguish slow reheating from a new hot-water fault.
Read thisWhat electrical work can a cylinder replacement involve?
Understand the electrical scope of cylinder replacement, including immersion supplies, controls, circuit assessment and records to request at handover.
Read thisWhen might a cylinder temperature-and-pressure valve need replacing?
Understand when a cylinder temperature-and-pressure valve may need replacement, why discharge needs diagnosis and what the repair scope should include.
Read thisCylinder thermostat faults: inconsistent heating and overheating
Understand cylinder temperature-control faults, separate thermostats from safety cut-outs and report useful symptoms without opening electrical covers.
Read thisWhat records support a hot-water cylinder warranty?
Keep cylinder warranty evidence, distinguish vessel cover from other components and check the exact conditions before booking a repair or replacement.
Read thisDirect or indirect cylinder: choosing the heat-source arrangement
Compare direct and indirect cylinders using your heat source, electricity arrangements, recovery needs and future plans before choosing a replacement.
Read thisE1 boiler fault: what it means on Baxi, Potterton and other boilers
An E1 code on a boiler is usually the start of a longer Baxi or Potterton E1xx code. Read the full number, check pressure and gas, then reset only once.
Read thisElectric boiler vs gas boiler: which is right for your home?
Electric or gas boiler? Compare running costs, installation, supply limits, servicing and space so you can choose the right boiler for your home or flat.
Read thisElectric shower keeps cutting out: safe next steps
An electric shower cutting out needs its symptom and model identified. Recognise unsafe conditions and arrange diagnosis without opening covers or wiring.
Read thisElectric shower not working: what to check first
No power, no water, or water but no heat? Check the pull cord, the breaker, the water supply and the shower head first. What each fault usually means.
Read thisExpansion vessel or internal air gap: how cylinder designs differ
Understand external expansion vessels and internal air-gap cylinder designs, how to identify your model and why maintenance must follow its instructions.
Read thisFree boiler grants and ECO4: what is still available?
Can you still get a free boiler? What ECO4 covered, where it stands now, which grants remain, and how to avoid free boiler scams. Check before you apply.
Read thisFrozen condensate pipe: how to thaw it and restart the boiler
Boiler stopped in freezing weather? How to spot a frozen condensate pipe, thaw it safely with warm water, reset the boiler and stop it freezing again.
Read thisIs there a gas boiler ban? What it means for your home
Are gas boilers being banned? What applies to existing and new-build homes, what hydrogen-ready means, and whether to replace a gas boiler now or wait.
Read thisGlow-worm F22 fault: pressure and circulation diagnosis
Understand Glow-worm F22 using the Energy7 System reference, what pressure readings can tell you and why filling or replacing parts needs proper advice.
Read thisDoes a heat pump need a different hot-water cylinder?
Assess whether a cylinder suits a heat pump by checking its heat exchanger, operating conditions, recovery and controls before deciding to replace it.
Read thisHeating stays on when the thermostat is off
Heating continuing after the thermostat is off may involve controls, valves or normal boiler functions. Learn which observations help a repair enquiry.
Read thisPlanning stored hot water for a shared rental property
Plan hot water for a shared rental using shower timing, simultaneous demand, recovery and maintenance access, with clear assumptions for the designer.
Read thisWhat temperature should a hot water cylinder be set at?
Store hot water in a cylinder at 60°C or above. Why that stops legionella, how to avoid scalding at the taps, and how to check your cylinder's setting.
Read thisHow long do boilers last, and when is it time to replace one?
A modern gas boiler can last up to about 15 years with annual servicing. Learn what shortens a boiler's life and the signs that replacement makes sense.
Read thisHow long does it take to replace a boiler?
A like-for-like combi swap is usually done in a day. Moving the boiler or converting to a combi can take two to three days. See what changes the timings.
Read thisHow long does a boiler service take?
A standard gas boiler service usually takes 30 to 60 minutes. See what the engineer checks, what makes a visit run longer and how to keep it on time.
Read thisHow often should a boiler be serviced?
A gas boiler should be serviced every 12 months. What the law says for owners and landlords, what a missed year does to a warranty, and when to act sooner.
Read thisHow old is my boiler? Five ways to find out, and what the age means
Find your boiler's age from the paperwork, the serial number, the energy label or its design, then see what that age means for repair or replacement.
Read thisHow to reset a boiler, and when you should not
How to reset a boiler that has locked out: the checks to make first, where the reset control is, how often to try it and when to call a Gas Safe engineer.
Read thisTurn off the gas at the meter: where it is and how
Where your gas meter is likely to be, how to find the emergency control valve, which way is off, and when it is safe to turn the gas back on yourself.
Read thisF1 boiler fault on an Ideal boiler: low water pressure
F1 on an Ideal boiler means low water pressure. How to check the gauge, top up to 1 to 1.5 bar, reset once, and what it means if F1 keeps coming back.
Read thisF2 boiler fault on an Ideal boiler: flame loss explained
F2 on an Ideal boiler means flame loss: the burner lit, then went out. Check the gas supply and meter credit first, then when to call a Gas Safe engineer.
Read thisIdeal L1 fault: boiler overheating or no water flow
Ideal L1 is a lockout for flow overheat or no water flow. What causes it, the checks you can safely make, and when to call a Gas Safe registered engineer.
Read thisIdeal L2 fault: what to check in the appliance information
Ideal L2 needs the correct appliance manual and fault history. Learn what the code means for Logic Code Combi ESP1 and how to prepare a repair enquiry.
Read thisImmersion heater not working: checks and likely faults
Immersion heater stopped working? Check the switch, timer, off-peak setting and breaker first, then the signs of a failed element, thermostat or cut-out.
Read thisHow much does an immersion heater cost to run?
Work out your immersion heater's running cost in kWh, how long it takes to heat a cylinder, why it costs more than gas, and the faults that push bills up.
Read thisIs boiler cover worth it? When it pays and when it does not
What boiler cover and home emergency policies include, the exclusions that catch people out, and when paying per repair makes more sense than a plan.
Read thisMegaflo service or repair: choosing the right visit
Choose a Megaflo service, fault investigation or replacement survey using the current symptoms, model and maintenance history to brief the right visit.
Read thisMira shower not working: common faults and getting it repaired
Mira shower stopped working? Find out which type you have, the checks Mira itself recommends, the usual faults, and when to book Mira or a local plumber.
Read thisPreparing your home for a Mixergy cylinder installation
Prepare a Mixergy installation with model and heat-source details, an electrical assessment, connectivity plan and clear commissioning responsibilities.
Read thisPlanning a Mixergy cylinder alongside solar PV
Plan Mixergy and solar PV together by checking the cylinder, diverter arrangement, electrical work and commissioning scope before equipment is ordered.
Read thisMoving a boiler: survey, routes and disruption
Planning to move a boiler? Assess the position, flue, drainage, pipe routes and future maintenance access before committing to a kitchen or loft layout.
Read thisNo hot water in the shower but the taps are fine
Hot taps work but the shower runs cold? The cause depends on the shower type: mixer cartridge, electric shower element, pump or flow. What to check first.
Read thisNo water coming out of the hot tap: causes and checks
Cold taps fine but nothing from the hot? Usually a closed valve on a combi, an empty loft tank, or a blocked valve on an unvented cylinder. What to check.
Read thisPlanning a boiler flue before building work
Plan a boiler flue around the appliance, openings, inspection access and future building work. Learn what a professional survey needs to resolve first.
Read thisPoint-of-use water heater or cylinder for a remote sink?
Compare a local water heater with extending a cylinder supply to a remote sink, considering demand, electrical capacity, waiting time and service access.
Read thisPreparing your home for boiler replacement
Prepare for boiler replacement with an access, shutdown and handover checklist. Coordinate the installation with occupants and other planned building work.
Read thisRepair or replace a boiler: how to decide
Repair or replace your boiler? Compare diagnosis, parts, reliability, installation work and future heating plans before choosing a repair or replacement.
Read thisReplacing a hot water cylinder: planning guide
Replacing a hot water cylinder? Plan capacity, heating compatibility, access, safety arrangements and handover before comparing installation proposals.
Read thisCan the loft water tank be removed after a system change?
Plan retirement of a cold-water storage tank by identifying every connected outlet, the replacement supply and access arrangements before removal starts.
Read thisShower pump not working: causes and what to check
Silent, humming, pulsing or weak? How to check the power, the tank and the filters on a shower pump, and when it needs repairing or replacing by a plumber.
Read thisCan an existing cylinder work with solar thermal?
Check cylinder suitability for solar thermal, including the heat exchanger, backup heat source, controls and the questions to resolve with both installers.
Read thisThermostatic mixing valves: do you need one, and which type?
What a thermostatic mixing valve does, when the rules require one on a bath, TMV2 vs TMV3, where to fit it and how to tell when it needs a service.
Read thisWhen does a hot-water cylinder need two coils?
Understand when two cylinder coils are useful, how they differ from immersion heaters and what to confirm before combining solar and another heat source.
Read thisTypes of boilers in the UK: combi, system and regular compared
Combi, system and regular boilers compared: how each supplies hot water, the space it needs, the homes it suits and why condensing is not a separate type.
Read thisWhat an installer checks in a cylinder discharge route
Prepare for a cylinder discharge-route survey with model details, access and alteration records, and learn why visible pipework is only part of the check.
Read thisWhat happens during an unvented cylinder service?
Prepare for an unvented cylinder service with the right model details, access and fault history, and understand how maintenance findings become next steps.
Read thisWhat should an unvented cylinder service record show?
Read a cylinder service record: identify completed work, access limits, defects and follow-up actions without confusing it with a landlord gas record.
Read thisUnvented vs vented hot water cylinder: which suits your home?
Unvented cylinders run on mains pressure with no loft tank; vented ones are fed from a tank. Compare pressure, space, safety rules and when each fits.
Read thisVaillant boiler no hot water: causes and what to check
No hot water from a Vaillant ecoTEC? Check the display code, pressure, gas and hot water setting first, then the diverter valve, flow sensor and scale.
Read thisVaillant F23 fault: water not moving through the boiler
Vaillant F.23 means water is not circulating properly: the flow is far hotter than the return. Pressure and air checks you can do, and when to call.
Read thisVaillant F27 fault: flame detected when it should not be
Vaillant F.27 means the boiler saw a flame signal with the gas valve closed. Why it happens, why it is an engineer job, and what to tell us when you call.
Read thisVaillant F28 ignition failure: safe next steps
See what Vaillant F28 indicates on the relevant ecoTEC models, which details help a repair enquiry and when a gas emergency needs immediate escalation.
Read thisVaillant F29 fault: flame lost while the boiler was running
Vaillant F.29 means the flame went out mid-cycle and the boiler could not relight. Check the gas and condensate pipe first, then when to call an engineer.
Read thisVaillant F75: what the code can and cannot tell you
Understand the limits of a Vaillant F75 code, what model details to provide and how pressure, circulation and fault history shape a proper repair visit.
Read thisVaillant F83 fault: what it means and what to do
Vaillant F.83 means the burner lit but the water barely warmed. Check the pressure and valves, reset once, and know when it needs a Gas Safe engineer.
Read thisReplacing a vented hot-water cylinder: what must match
Compare retaining a vented cylinder with changing the hot-water arrangement, including tank height, shower compatibility, access and the replacement scope.
Read thisWhat is a Megaflo, and is it worth it over a combi?
A Megaflo is an unvented hot water cylinder that stores hot water at mains pressure. How it works, when it beats a combi, what it needs and its upkeep.
Read thisWhat pressure should my boiler be? Reading the gauge properly
Most combi and system boilers should read about 1 to 1.5 bar cold and up to about 2 bar hot. How to read the gauge and when a reading means a fault.
Read thisWhat size boiler do I need?
How to size a combi, system or regular boiler: hot water kW, heat loss, mains flow and bathrooms, and why a bigger boiler is often the wrong choice.
Read thisWhere to put a carbon monoxide alarm, room by room
Where to put a carbon monoxide alarm: which rooms need one, distance from the boiler, ceiling or wall height, where never to fit it, and landlord rules.
Read thisWorcester boiler flashing blue light: what it means and what to do
A flashing blue light on a Worcester boiler means it has stopped with a fault. The safe checks to make, how to reset it once, and when to call an engineer.
Read thisWorcester boiler no hot water: causes and what to check
No hot water from a Worcester Bosch boiler? Check the display, pressure, gas and condensate pipe first, then the diverter, flow sensor and heat exchanger.
Read thisWorcester Bosch E9 fault: why the model matters
Understand why a Worcester E9 fault needs the full model and cause code, what observations help and how to prepare for an overheating fault assessment.
Read thisWorcester Bosch EA fault: understanding the repair enquiry
Worcester EA needs the model and additional cause code to be useful. Understand the differences and prepare the right details for a boiler repair visit.
Read thisBoiler leaking water: safe next steps
Boiler leaking water? Switch it off from a dry spot, keep clear of wet electrics and do not open the casing. Gas Safe registered engineers: 020 4652 8585
Read thisBoiler losing pressure: causes and next steps
Boiler keeps losing pressure? Water is escaping somewhere: a radiator, hidden pipework or the pressure relief valve. What to check, or call 020 4652 8585.
Read thisHot water cylinder leaking: what to do next
Hot water cylinder leaking? Learn the difference between a vessel leak, pipe connection and safety discharge, with safe next steps and repair choices.
Read thisHot water runs cold: understand the pattern
Hot water runs cold after starting warm? Compare combi, cylinder and single-shower patterns, record safe observations and decide what needs assessment.
Read thisNo hot water but heating works: what to check
No hot water but the heating works? A combi and a cylinder system fail in different places, so check which you have and which taps are cold. 020 4652 8585
Read thisOverflow pipe dripping outside: what it means
An overflow pipe dripping outside can be a cistern or tank fill valve, a boiler or cylinder discharge, or condensate. How to tell which. Never cap it.
Read thisTundish dripping: what the discharge means
Tundish dripping near your hot water cylinder? Understand why discharge needs assessment, what to report safely and why safety outlets must stay clear.
Read this
Need help with a fault or planning a project? Tell us what you need.
Arrange the work behind the guidance
For a repair, investigation or installation in London, describe the property and the work you need. Our team can explain the next step and the information needed for the visit.
Boiler replacement and installation →Plumbing problem? Speak to us now.
24/7 across London and inside the M25. £60 call-out; the labour rate is agreed before we attend.