Skip to content
10 active vans · 24/7 · London & the M25
ResidentialCommon faults
Get in touch
Book an engineer

London-wide plumbing & heating

Boiler repair in London: fault finding and fixes

Diagnosis for a boiler that locks out, behaves erratically or fails to provide heating or hot water, with servicing available as a separate maintenance task.

  • Diagnose the reported fault
  • Explain repair options
  • Check operation after work
Hands working on components inside a heating appliance
Illustrative photograph
10 active vans24/7 emergency responseAll London boroughs · Inside the M25

£5 million public liability insurance Gas work carried out by Gas Safe registered engineers. About our company →

Let’s get your job moving.

Tell us where you are and whether you need urgent help or a planned visit.

The work we handle

Loyal Plumbers repairs boilers 24/7 across London and inside the M25, including loss of heating, no hot water, lockouts, leaks and recurring pressure problems. Our Gas Safe registered engineers carry out gas appliance work with the qualifications relevant to the installation. We explain the fault and proposed repair, then check operation after the agreed work. For planned maintenance of a working boiler, book our separate boiler servicing service.

Diagnose the reported fault

Review the symptoms and fault history, then check the appliance and relevant external controls or system conditions.

Explain repair options

Identify the work supported by the diagnosis, including parts availability and any issues beyond the boiler itself.

Check operation after work

Test the repaired functions and explain further work or servicing where it is appropriate.

A clear route for your property.

Different faults and projects need different work. These are the main options for this service.

Arrange boiler fault diagnosis
The boiler is faulty now
Book diagnosis: an annual service is not a substitute for finding the cause of a breakdown.
The boiler works but needs maintenance
Book a boiler service for planned inspection and maintenance according to the appliance requirements.

From first enquiry to the next step

  1. Share the boiler symptoms

    Tell us the make, model if known, fault code and whether heating, hot water or both are affected.

  2. Investigate before replacing parts

    We check the fault and discuss the repair scope supported by the findings.

  3. Test the affected functions

    We check the work and explain controls, monitoring or separate system repairs where relevant.

Agree the rates and scope before work starts. £60 call-out. Hourly rate agreed before we attend. For installations and larger work, the proposal sets out the agreed scope and price.

How our pricing works

Service details & practical advice

The work explained, answers to common questions and related services.

Boiler breakdowns and intermittent faults

We investigate boilers that fail to start, stop during a heating cycle, display fault codes or no longer deliver reliable heating and hot water. The diagnosis uses the make and model, operating symptoms and relevant appliance tests to distinguish a failed component from a control, circulation or connected-system problem. A displayed code helps direct testing; it is not by itself an instruction to replace a part.

When booking, give us the boiler model, any visible code and whether the problem affects heating, hot water or both. Include pressure changes, recent work and intermittent behaviour, even if the boiler currently runs. We match gas appliance work to an appropriately qualified Gas Safe registered engineer; never remove the casing to gather these details.

  • No heating, no hot water and repeated lockouts.
  • Leaks and pressure that repeatedly falls or rises abnormally.
  • Boilers that stop during demand or operate inconsistently.
  • Faults involving the boiler’s controls or connection to the heating system.

Finding the fault across heating and hot water

For a combi boiler, the investigation checks the appliance response to heating and hot-water demand and follows the fault through the relevant controls and heat-transfer components. Where heating works but the taps remain cold, this helps distinguish a hot-water-specific fault from a failure affecting the whole appliance.

With a separate cylinder, we also establish whether the cylinder receives its heat demand and whether the connected controls or circuit are involved. One cold shower while other taps work can point to a local mixing problem instead. We direct the work to the affected system rather than assuming every hot-water complaint needs an internal boiler repair. The team can request photographs of visible labels or displays by email after your enquiry.

An agreed repair and a clear outcome

We explain the fault found, the proposed repair, the required parts and any further testing before extending the work. Replacement components need to suit the appliance model. If the investigation identifies pressure loss in concealed heating pipes or another issue outside the boiler, we separate that work from the appliance repair so its access and scope are clear.

Following repair, operation is checked against the fault that prompted the visit. We explain any remaining limitation or follow-up requirement. Where replacement is a realistic alternative, we compare it with the available repair in light of the appliance condition, part availability and wider installation; age alone does not establish that a boiler needs replacing.

Repair scope, parts and cost

We agree the diagnostic and charging basis before work proceeds. The repair total depends on the fault found, compatible components, access and the tests needed after fitting. A controls adjustment, an internal appliance repair and a leak in concealed heating pipework have different scopes. We explain any additional investigation before extending the job.

When a component must be ordered, we identify the supported part and confirm the next step separately from the initial diagnosis. Parts supply and repair access can require a return visit; an estimated delivery is not a guaranteed completion date. Planned servicing and landlord gas safety checks remain separate tasks that can be included when explicitly requested.

Safe checks before the visit

You can read the external display and compare normal user settings with the appliance manual, provided the area is safe and dry. Note an obvious supply interruption or changed timer. Do not open the boiler casing, work on gas components, test live wiring or repeatedly reset a boiler that locks out.

If you suspect a gas escape, a carbon monoxide alarm sounds or you suspect carbon monoxide, leave the property and call the National Gas Emergency Service on 0800 111 999 from outside in a safe place. Avoid flames and operating electrical switches. Seek urgent medical help for suspected exposure, and call 999 if anyone has severe symptoms. Do not wait for an online booking response.

Gas boiler work requires a Gas Safe registered engineer qualified for that appliance and work category. Check the engineer’s identification before work begins.

Access and information that help the visit

Clear ordinary stored items from around the appliance if this can be done safely, and arrange access to the controls and relevant rooms. Do not dismantle boxing or move fixed equipment yourself. In flats, let us know if plant, flues or isolation points are behind a locked communal door.

Landlords and facilities teams should provide tenant contact arrangements, authorisation limits and the reporting requirements for the property. If hot water or heating has failed at occupied business premises, describe the operational impact so the discussion reflects actual needs rather than only the appliance model.

Common boiler faults we are called to

Most calls fall into a handful of patterns. Telling us which one matches your boiler, and any fault code on the display, helps us arrange the right engineer and likely parts. If water is dripping from the casing, our guide to a boiler leaking water explains what to do while you wait.

  • No heating, no hot water, or one working without the other
  • A boiler that locks out and needs resetting more than once
  • Pressure dropping, or rising with water from the relief pipe outside
  • Water leaking from the boiler or the pipework beneath it
  • Kettling, banging or gurgling noises when the boiler fires
  • A frozen or blocked condensate pipe, a common cause of winter lockouts on condensing boilers
  • Fault codes on Worcester Bosch, Vaillant, Baxi, Ideal, Glow-worm and other makes

Emergency boiler repair

If the boiler has failed completely in cold weather, or someone vulnerable has no heating or hot water, say so when you contact us and we will treat it as urgent. We work 24/7 across London and inside the M25 with 10 active vans.

If you smell gas, do not wait for a plumber. Leave the property, avoid switches and flames, and call the National Gas Emergency Service on 0800 111 999. Once the emergency service has made the supply safe, our Gas Safe registered engineers can diagnose and repair the appliance.

Repair or replace?

Many breakdowns come down to a single failed part such as a fan, pump, diverter valve, sensor or circuit board, and are worth repairing on a boiler that is otherwise in good condition. Replacement becomes a sensible conversation when the same boiler keeps failing, when parts are no longer available or when the heat exchanger itself is leaking. We give you the diagnosis first so the decision is yours, and our guide on whether to repair or replace a boiler sets out the questions worth asking.

Request the right boiler appointment

Use the enquiry form with your postcode, boiler information and whether this is a breakdown, intermittent fault or routine service. State any pressure readings as observations and say whether they were taken with the system cold or running. We can then clarify the appropriate scope and availability.

After the work, keep the diagnosis, repair details and service record. If the fault returns, note whether it is the same behaviour or a new symptom. That record supports a more useful follow-up than repeatedly resetting the boiler without documenting what happened.

Start with written details in the enquiry form. If photographs would help, the team can request them by email after your initial enquiry; the form does not accept image uploads. Only take photographs where access is safe.

Common questions

Can a service fix a breakdown?

A fault may be discovered during maintenance, but diagnosis, replacement parts and repair can require a different scope. Report the breakdown when booking so it is not treated as routine servicing.

Do I need a new boiler if it loses pressure?

Not necessarily. The loss may originate elsewhere in the heating system. The source and repair options need assessment before deciding whether replacement is appropriate.

Can you service a boiler in a commercial property?

Describe the appliance and premises when enquiring. The correct work category and scope depend on the installation; a domestic appliance in a business setting and commercial plant are not interchangeable descriptions.

Do you offer emergency boiler repair?

Yes. We work 24/7 across London and inside the M25, and gas work is carried out by Gas Safe registered engineers.

Should I keep resetting a boiler that locks out?

One reset, as the manual describes, is reasonable. If it locks out again, stop and note the fault code. Repeated resets can hide the pattern that helps find the fault.

Sources and further reading

Choose the work you need

Useful guides for this service

Explore all boilers, cylinders and hot water guides →

Need help with this in London?

Emergency repairs, investigations and planned installations across London and inside the M25. Tell us what you need so we can agree the next step.

Discuss your job